One of the purposes of selecting fasteners is to ensure that you get one that meets your requirements. To do so, it’s normally important to have some understanding of the many types of fasteners available and their characteristics. This allows you to match a specific fastener type. One of the purposes of selecting fasteners is to ensure that you get one that meets your requirements. Because of their characteristics, Socket Head Cap Screws are commonly used in a wide range of industries. To do so, it’s normally important to have some understanding of the many types of fasteners available and their characteristics. You may then match a certain fastener type to a specific application this way.
Types of Cap Screws are as Follows:
- Flathead Cap Screws: These cap screws feature a thin, level head. On the head, they could have a slot. These screws are the best option when you require the fastener to be flush with the surface you’re installing it in. This is why these screws are employed in applications where no protrusions from the surface are required. For example, when putting together the fuselage of an aircraft, you don’t want too many protrusions due to fasteners because this causes greater drag and may also compromise the plane’s aerodynamics. All of these things can be avoided by using flat head cap screws.
- Hex Head Cap Screws: This is one of the most frequent screw types. These screws are best used when a heavy-duty screw is required to hold an item together. They’re also a good choice if the fastener is going to be subjected to a lot of force. It’s usually best to figure out how much force the fastener will be subjected to before choosing the correct hex head cap screw. This will make determining the exact size and material of the screw that has to be ordered much easier.
- Round Socket Head Screws: Depending on the size of the head, they might be high or low. The heads of the low ones are virtually flat, whilst the heads of the high ones are usually projecting. These are commonly used to assemble circuits.
