Threaded Rods Manufacturer in Mumbai, India

Stainless Steel Half Threaded Rod, Monel Full Threaded Rod, Inconel Full Thread Studs, Hastelloy Half Thread Studs, Titanium Threaded Rods Manufacture in Mumbai, India.

Duplex Steel Fully Threaded Rods, Alloy Steel Partially Threaded Rods, Super Duplex Steel Threaded Rod Stockholder, Incoloy Tap End Threaded Rods Exporter, Alloy 20 Double End Threaded Rods, SS Metric Threaded Rods Supplier.

Niko Steel Engg LLP manufactures a variety of threaded rod that is supplied and exported to different parts of the globe. These rods or studs have threaded ends at both sides which give them a similar look to screw. However, screws are shorter in length whereas threaded rods are long. The diameter of threaded rods is the same throughout their lengths. Sometimes they are called as all-threaded rod because they have threads all along the length whereas rod with thread only at ends.

Threaded rods are useful for fastening metal or wood together acting as a pin. Also, these rods act as a stabilizer for structures as they are inserted into wood or concrete materials to provide stabilization. Hence, they are useful in construction industries to build homes or buildings. Moreover, these rods are good for building furniture or for hanging heavy sheet metal ducts.

The popular uses of these rods are found in agricultural, electrical and constructional industries due to their versatility. Industries where corrosive solutions are in use and where plant maintenance is required, these rods are very useful. Plumbing and contractor fields also use these rods. Since they are corrosion resistant thus they are also found in machinery, maintenance, and medical industry.

No need to use raw material with them as they are strong enough to offer stability. However, nuts and washers are used along with these rods. Also, cutting them is easy with any metal cutting hack saw.

There are two types of direction available in rods- left hand and right hand. Some even have a combination of these two types. The right-hand rods are moved in a clockwise direction to configure whereas the left hand is moved in the opposite direction. However, commonly used rods are right hand whereas in applications where motor vibration is present left hand is found suitable.

Different materials like copper, aluminum, stainless steel, titanium, and brass are used to manufacture threaded rod. Applications like medical and aerospace require lightweight rods, therefore, titanium rods are used. Applications where corrosion-resistant ability is required stainless steel rods are used. In the applications of high-temperature, brass rods are preferred widely because of their good strength. Aluminum rods are suitable for the application of good thermal, oxidation resistance, and electrical conductivity.

Specification of Threaded Rod
Dimension : ASTM, DIN, BS, GB, IS and all International Standards
Size : M6 to M52 & 1/4" to 2"
Length : 1000mm to 3000mm & 1feet to 12feet
Standard : DIN975
Materials / Grades : Stainless Steel
Finish : Zinc Plated, Plain, Hot Dip Galv. & Yellow Zinc
Threaded Rod Materials

If you would like to inquire or place an order.
Call :+91 22 66362225/ 66662225/ 67432225

Other Threaded Rod Types

Double End Threaded Rods, Fine Pitch Threaded Rods, Metric Threaded Rods, All thread Rods, Heavy Threaded Rods, Acme Threaded Rods, Fully Threaded Rods, Partially Threaded Rods, Tap End Threaded Rods, Trapezoidal Threaded Rods, Coil Rod, Threaded Bars.